The Work Sharp WSSAKO81113 Assorted Belt Kit review is for owners of the Ken Onion Edition Knife & Tool Sharpener who want a spread of abrasive grades without assembling a set one grit at a time.
Its five belts cover coarse grinding through extra fine finishing, but compatibility is limited to the specified sharpener.
Work Sharp Belt Kit Review Summary
The quick verdict

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement set for Ken Onion Edition owners who want several sharpening stages in one kit and have confirmed the tool fit.
- Five-belt assortment: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is identified as a P220 equivalent; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.
Pros
- Provides five distinct abrasive grades in one replacement kit.
- Covers a broad progression from extra coarse work to extra fine finishing.
Consider before buying
- Compatibility is restricted to the Ken Onion Edition WSKTS-KO; it is not a general-purpose Work Sharp belt set.
- The extra fine Micro-Mesh belt is narrower than the other four, so buyers should account for the different size when selecting a replacement.
Read the full review summary
This kit combines five belt grades for different points in a sharpening or grinding routine: P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
The first four use the same 3/4-by-12-inch size, while the 6000 belt is a narrower 1/2-by-12-inch Micro-Mesh belt.
That range gives a Ken Onion Edition owner a convenient progression to work with, especially if they want replacement belts across more than one stage.
The deciding factor is fit. These are replacements for the Work Sharp Ken Onion Edition WSKTS-KO and do not fit other Work Sharp tools or accessories.
Buyers should confirm their sharpener model before ordering, then consider whether the included spread suits their work: this kit combines several grades, while a single-grit refill may make more sense when only one stage needs replenishment.
The buying factors
Work Sharp Belt Kit Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Grit range
Five grades span from P120 extra coarse to 6000 extra fine, supporting multiple stages in one kit.
Kit versatility
The assortment covers coarse, medium, fine, and extra fine work, though its usefulness depends on needing several grades.
Compatibility clarity
The intended Ken Onion Edition model is clearly specified, with a clear warning against use on other Work Sharp tools.
Size consistency
Four belts share a 3/4-by-12-inch size; the extra fine Micro-Mesh belt is narrower at 1/2 by 12 inches.
Sharpening focus
The abrasives are designed for knife and tool sharpening and grinding applications.
Replacement convenience
Five different grades arrive together, which can simplify restocking several stages at once.
Key Features and Specifications of Work Sharp Belt Kit
- Five-belt assortment: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is identified as a P220 equivalent; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.
- Designed as a replacement abrasive assortment for the Work Sharp Knife & Tool Sharpener Ken Onion Edition, model WSKTS-KO.
- The engineered abrasives are intended for knife and tool sharpening and grinding applications.
- Manufactured in the USA by Norton Abrasives for Work Sharp.
Pros and Cons of Work Sharp Belt Kit
Pros
- Provides five distinct abrasive grades in one replacement kit.
- Covers a broad progression from extra coarse work to extra fine finishing.
- Lists useful grit equivalents for the coarse, medium, and fine belts.
- Clearly identifies the compatible sharpener and belt dimensions.
Consider before buying
- Compatibility is restricted to the Ken Onion Edition WSKTS-KO; it is not a general-purpose Work Sharp belt set.
- The extra fine Micro-Mesh belt is narrower than the other four, so buyers should account for the different size when selecting a replacement.
- An assortment may be less useful if only one grit is needed; a dedicated refill kit can better match a single-stage restock.
Who Should Buy Work Sharp Belt Kit?
Good fit
Consider this kit if you own the Ken Onion Edition WSKTS-KO and want to replenish several stages of your sharpening or grinding routine together.
The range from P120 extra coarse through 6000 extra fine gives you options across different tasks, and the listed equivalents help make the middle and finer grades easier to compare with familiar grit references.
It is also a sensible format if you prefer having multiple replacement grades available rather than buying each stage separately.
Before ordering, check the model label on your sharpener and confirm that the narrower 1/2-inch Micro-Mesh belt suits the extra fine stage you intend to replace.
Who should skip it
Skip this assortment if your Work Sharp tool is a model other than the Ken Onion Edition WSKTS-KO.
The compatibility note specifically excludes other Work Sharp tools and accessories, so check your tool model and belt requirements before buying.
Consider a single-grade refill instead if you only need one specific stage. Buying five grades together may leave you with belts you do not need for your current sharpening routine.
How the Work Sharp Belt Kit fits a sharpening routine
A broad progression in one pack
The grades range from P120 extra coarse to 6000 extra fine, with coarse, medium, and fine options between them. That spread makes the kit useful when you want replacement abrasives for multiple stages on hand.
It does not prescribe a particular sharpening sequence, so choose the grade that fits the work at hand and your existing technique.
Check the model before the grit
Compatibility is the key purchase check: these belts are for the Ken Onion Edition WSKTS-KO and do not fit other Work Sharp tools or accessories.
If you are buying for a shared workshop, verify the exact sharpener model rather than relying on the brand name alone.
Account for the narrower finishing belt
Four belts measure 3/4 by 12 inches, but the 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.
That makes the fine-grit assortment worth checking against the intended belt position and replacement need before purchase; the size difference is part of the kit design.
Choose an assortment for several stages
A five-grade set is most useful when more than one abrasive stage needs restocking or you want multiple grades available for different knife and tool work.
If your immediate need is only an X4 fine or X22 medium belt, a dedicated single-grade kit may avoid adding grades that will sit unused.
Alternatives to Work Sharp Belt Kit
Sander Belts alternative

700+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81120 Fine Grit Belt Kit
Choose the assortment if you need several grades from coarse to extra fine. Choose the WSSAKO81120 if your Ken Onion Edition routine specifically calls for multiple X4 fine replacements and you want five belts of the same grade.
- The WSSAKO81120 contains five X4 fine 4-micron Norton Norax belts, identified as P3000 equivalent.
- Each measures 3/4 by 12 inches and is intended for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The WSSAKO81113 combines five grades, from P120 extra coarse through 6000 extra fine, with four belts at 3/4 by 12 inches and one narrower Micro-Mesh belt.
Sander Belts alternative

500+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81119 Medium Grit Belt Kit
The assortment suits buyers who want several different grades together. The WSSAKO81119 is a more focused choice when you need to replenish the medium stage with five matching belts.
- The WSSAKO81119 contains five X22 medium 22-micron Norton Norax belts, identified as P1000 equivalent.
- The 3/4-by-12-inch belts are intended for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The WSSAKO81113 includes X22 medium as one of five grades, alongside coarse and finer options.
Is Work Sharp Belt Kit Worth It?
The Work Sharp WSSAKO81113 Assorted Belt Kit is worth considering for owners of the Ken Onion Edition WSKTS-KO who need replacement abrasives across several sharpening and grinding stages.
Its five grades give the kit breadth, and the stated dimensions make it possible to check each belt against the intended use.
Confirm the sharpener model before buying and remember that the 6000 Micro-Mesh belt is narrower than the others.
If you only need one grade, a dedicated refill kit may be a closer match; for a multi-grade restock, this assortment is a practical option.
Your review at a glance

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement set for Ken Onion Edition owners who want several sharpening stages in one kit and have confirmed the tool fit.
- Five-belt assortment: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is identified as a P220 equivalent; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.