The VIVO Extra Tall Single Monitor Desk Stand review is for anyone trying to raise one compatible screen to a standing-height position while keeping the monitor on a freestanding base.
Its 40-inch pole, broad range of screen adjustments, and tabletop setup suit a focused single-monitor workspace, though height changes require a tool-based adjustment rather than quick repositioning.
VIVO Extra Tall Stand Review Summary
The quick verdict

5,000+ ratings
Read Amazon ReviewsVIVO STAND-V011H Extra Tall Single Monitor Desk Stand
A freestanding, extra-tall monitor stand for buyers who want a raised screen and broad angle adjustment without attaching a mount to the desk.
- Designed for one monitor measuring 13 to 27 inches and weighing up to 22 pounds.
- Requires a compatible 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the back of the monitor.
- Uses a freestanding steel base and a 40-inch center pole for an elevated screen position.
- Provides tilt adjustment from +45 to -45 degrees, 180-degree swivel, and 360-degree rotation.
Pros
- The extra-tall 40-inch pole supports a higher screen placement than a standard desk stand profile.
- A freestanding base can suit desks where a clamp-on mount is inconvenient or unwanted.
Consider before buying
- Height adjustment requires loosening and tightening a bolt, so it is not designed for fluid, frequent changes.
- The 13-to-27-inch screen range and 22-pound weight limit rule out larger or heavier monitors.
Read the full review summary
The STAND-V011H combines a freestanding steel base with an extra-tall center pole and an articulating VESA bracket.
It fits screens from 13 to 27 inches weighing up to 22 pounds, provided they use a 75 x 75 mm or 100 x 100 mm VESA pattern.
Tilt, swivel, and rotation give users several ways to orient the display, while cable management helps keep wires organized along the stand.
This design is most compelling when a single screen needs to sit substantially higher than a typical desk-level setup, or when a desk clamp is not the preferred mounting style.
The tradeoff is that the stand’s height adjustment is made by loosening and tightening a bracket bolt; it is better suited to setting a position and leaving it there than to frequent up-and-down changes.
Check your monitor’s weight, screen size, VESA pattern, and the space available for a freestanding base before choosing it.
The buying factors
VIVO Extra Tall Stand Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Screen compatibility
The 13-to-27-inch and up-to-22-pound limits cover a useful range of single monitors, with VESA 75 x 75 mm or 100 x 100 mm mounting required.
Height reach
The 40-inch pole is the defining feature and gives this stand a taller profile for elevated viewing positions.
Angle adjustment
The bracket supports tilt from +45 to -45 degrees, 180-degree swivel, and 360-degree rotation.
Ease of repositioning
The height can be changed, but the bolt must be loosened and tightened, making frequent vertical movement less convenient.
Desk setup flexibility
A freestanding tabletop base avoids the need to attach a clamp or grommet mount to the desk.
Assembly support
The open-top VESA plate system, included hardware, and assembly instructions are intended to simplify installation.
Key Features and Specifications of VIVO Extra Tall Stand
- Designed for one monitor measuring 13 to 27 inches and weighing up to 22 pounds.
- Requires a compatible 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the back of the monitor.
- Uses a freestanding steel base and a 40-inch center pole for an elevated screen position.
- Provides tilt adjustment from +45 to -45 degrees, 180-degree swivel, and 360-degree rotation.
- Allows height adjustment along the center pole; changing height requires loosening and tightening the bracket bolt.
- Includes cable management and an open-top VESA plate arrangement for mounting the monitor.
- The product carries a three-year warranty.
Pros and Cons of VIVO Extra Tall Stand
Pros
- The extra-tall 40-inch pole supports a higher screen placement than a standard desk stand profile.
- A freestanding base can suit desks where a clamp-on mount is inconvenient or unwanted.
- Multiple tilt, swivel, and rotation adjustments allow the screen to be angled or turned to portrait orientation.
- Cable management and the open-top VESA plate system help make setup more orderly.
Consider before buying
- Height adjustment requires loosening and tightening a bolt, so it is not designed for fluid, frequent changes.
- The 13-to-27-inch screen range and 22-pound weight limit rule out larger or heavier monitors.
- Compatibility depends on having one of the two listed VESA patterns; verify the monitor’s mounting points before purchase.
Who Should Buy VIVO Extra Tall Stand?
Good fit
Consider the VIVO Extra Tall Stand if you want one compatible monitor elevated on a tall pole and prefer a freestanding tabletop mount.
Its angle controls support fine positioning after installation, and the 360-degree rotation makes switching between landscape and portrait orientation possible.
It is a good fit for a setup where the display will stay at one chosen height for long stretches.
Before ordering, confirm that your monitor is within the size and weight limits and has a 75 x 75 mm or 100 x 100 mm VESA pattern.
Also make sure your desk has room for the base and that the intended screen position works with your chair or standing arrangement.
Who should skip it
Look elsewhere if your monitor exceeds 27 inches or weighs more than 22 pounds, or if its VESA mounting pattern is incompatible.
The stand is designed for one display, so it will not meet a need for mounting two screens.
Choose a different style if you expect to raise and lower the monitor repeatedly throughout the day. The bolt-based height adjustment is intended for occasional setup changes, rather than fluid movement.
How the VIVO Extra Tall Stand Fits a Single Monitor Setup
A taller screen position
The 40-inch center pole gives this stand its clearest purpose: placing one monitor higher than a conventional low-profile stand may allow.
That can help when a desk arrangement calls for an elevated display, but the pole height alone does not determine the final viewing position; the monitor’s size and the bracket setting also matter.
Plan the screen’s position in relation to your seated or standing posture before tightening the mount.
Set the height, then leave it
The stand offers height adjustment along the pole, but the bracket bolt must be loosened and tightened to make a change. This is a practical distinction for buyers choosing between a fixed-height workspace and one that changes often.
It supports positioning the display during setup, while frequent movement would add a manual adjustment step each time.
Angle options and monitor orientation
Tilt, swivel, and full rotation provide useful control over how the display faces the user. The screen can be placed in portrait or landscape orientation, which can suit different reading or work layouts.
These adjustments operate within a single-monitor configuration, so buyers who need side-by-side screens should select a stand designed for multiple displays.
Check the fit before assembly
A monitor must meet both the size and weight limits and use one of the listed VESA patterns.
Confirm those details from the monitor itself, then consider where the freestanding base will sit on the desk and how the cable route will work.
This avoids discovering after assembly that the screen or the available desktop does not match the intended setup.
Alternatives to VIVO Extra Tall Stand
Computer Monitor Arms alternative

20,000+ ratings
Read Amazon ReviewsVIVO STAND-V001 Single Monitor Desk Mount
Choose the STAND-V011H when a freestanding base and extra-tall pole are the priority.
The STAND-V001 is a better match for buyers with a suitable desk edge or grommet opening who want support for larger screens and a clamp-mounted arm.
- The STAND-V001 is a single-monitor desk mount for screens up to 38 inches, including ultrawides up to that size, and up to 22 pounds.
- It attaches with a C-clamp or optional grommet mount, offers height adjustment up to 16 inches along the center pole, and supports tilt from +90 to -90 degrees, 360-degree swivel, and 360-degree rotation.
- The STAND-V011H is a freestanding stand with a 40-inch pole, supports monitors up to 27 inches, and requires a bolt adjustment for height changes.
Computer Monitor Arms alternative

60,000+ ratings
Read Amazon ReviewsVIVO STAND-V002 Dual Monitor Desk Mount
The STAND-V002 is the relevant option if you need to mount two displays and can use a clamp or grommet installation. For one screen and a freestanding base, the STAND-V011H better matches the intended setup.
- The STAND-V002 supports two monitors measuring 13 to 30 inches and weighing up to 22 pounds each.
- It mounts to the desk with a C-clamp or optional grommet, offers tilt, swivel, and rotation, and includes cable clips along its arms and center pole.
- The STAND-V011H is built for one 13-to-27-inch monitor on a freestanding tabletop base.
Is VIVO Extra Tall Stand Worth It?
The VIVO STAND-V011H is worth considering when a single compatible monitor needs a substantially elevated position on a freestanding base.
Its 40-inch pole and range of angle adjustments make it a distinctive fit for that setup, with cable management and an open-top VESA plate adding practical installation details.
Buy it if the screen fits the stated size, weight, and VESA limits and you expect to leave its height mostly fixed after setup.
If you need frequent vertical repositioning, a larger-monitor fit, or support for multiple displays, choose a mount designed around those needs.
Your review at a glance

5,000+ ratings
Read Amazon ReviewsVIVO STAND-V011H Extra Tall Single Monitor Desk Stand
A freestanding, extra-tall monitor stand for buyers who want a raised screen and broad angle adjustment without attaching a mount to the desk.
- Designed for one monitor measuring 13 to 27 inches and weighing up to 22 pounds.
- Requires a compatible 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the back of the monitor.
- Uses a freestanding steel base and a 40-inch center pole for an elevated screen position.
- Provides tilt adjustment from +45 to -45 degrees, 180-degree swivel, and 360-degree rotation.