Product Reviews

SmallRig Super Clamp Review: A Compact Mounting Point for Camera Rigs

A compact clamp for creators who need to attach cameras or accessories to compatible rods, shelves, and other solid supports.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact way to add a mounting point to a compatible support, with an adjustable jaw and threaded holes for accessories.

This SmallRig Super Clamp review looks at where its simple design fits camera and lighting setups, and what to check before attaching gear.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach cameras or accessories to compatible rods, shelves, and other solid supports.

  • The jaw opens to about 40 mm at maximum and closes to 15 mm minimum, defining the support thickness range to check before purchase.
  • Threaded attachment points include 1/4-inch holes and a 3/8-inch hole for compatible accessories.
  • The clamp is made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp contact areas are designed to help limit slipping and scratching against the mounting surface.

Pros

  • The adjustable jaw makes the clamp adaptable to more than one support thickness within its specified range.
  • Both 1/4-inch and 3/8-inch threaded points support flexible integration with compatible rig accessories.

Consider before buying

  • The 15–40 mm jaw range rules out supports that fall outside those measurements, so measure the mounting point first.
  • This is a clamp rather than a complete positioning arm; buyers who need an extended or articulated reach will need additional compatible hardware.
Read the full review summary

This clamp combines an adjustable jaw with 1/4-inch and 3/8-inch threaded holes, giving it two useful roles in a small rig: securing to a support and providing attachment points for compatible accessories.

Its aluminum alloy and stainless steel construction keeps the design focused on a reusable piece of mounting hardware rather than a complete articulated arm or stand.

It is most appealing for photographers, video makers, and garage creators who already have a suitable support between 15 and 40 mm thick and want a compact clamp for a camera or accessory.

The product data gives a maximum weight recommendation of 3.3 pounds, so buyers should compare their full mounted setup with that limit and confirm the threaded connection and support are appropriate for the equipment.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The adjustable jaw and 1/4-inch plus 3/8-inch threads support several kinds of compatible mounting setups.

7/10

Support compatibility

A 15–40 mm jaw range covers a useful span of supports, but buyers need to measure their intended mounting point.

8/10

Accessory integration

The two thread sizes make it practical to build onto a camera or lighting rig with compatible hardware.

8/10

Portability

At 0.13 kg and described as compact, it is easy to include in a small equipment kit.

7/10

Build materials

Aluminum alloy and stainless steel are suitable choices for a durable-feeling equipment clamp, though material alone does not establish a load rating.

6/10

Load guidance

A maximum recommendation is provided, but buyers still need to account for the complete accessory setup and how it is mounted.

Key Features and Specifications of SmallRig Super Clamp

  • The jaw opens to about 40 mm at maximum and closes to 15 mm minimum, defining the support thickness range to check before purchase.
  • Threaded attachment points include 1/4-inch holes and a 3/8-inch hole for compatible accessories.
  • The clamp is made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp contact areas are designed to help limit slipping and scratching against the mounting surface.
  • The listed maximum weight recommendation is 3.3 pounds; evaluate the total attached gear against this limit.
  • The package includes one super clamp.

Pros and Cons of SmallRig Super Clamp

Pros

  • The adjustable jaw makes the clamp adaptable to more than one support thickness within its specified range.
  • Both 1/4-inch and 3/8-inch threaded points support flexible integration with compatible rig accessories.
  • Rubber contact pads are useful where surface marking or movement is a concern.
  • Its compact, 0.13 kg form is easy to carry as a spare mounting option.

Consider before buying

  • The 15–40 mm jaw range rules out supports that fall outside those measurements, so measure the mounting point first.
  • This is a clamp rather than a complete positioning arm; buyers who need an extended or articulated reach will need additional compatible hardware.
  • The 3.3-pound maximum recommendation calls for care when choosing the mounted equipment and considering the full setup.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider it if you need a compact way to clamp a camera or accessory onto a suitable rod, shelf edge, crossbar, or other solid support.

The two thread sizes can make it a useful connector in a rig that already uses compatible mounting hardware.

It also makes sense as a small utility item for a camera kit or workshop where mounting positions change between projects.

Before using it, measure the support thickness, check that the threaded attachment matches your accessory, and keep the complete load within the stated recommendation.

Who should skip it

Skip it if your support is thinner than 15 mm or thicker than about 40 mm, or if the setup requires an arm that positions equipment away from the clamp itself.

Choose a different mounting approach when the complete equipment load exceeds the stated maximum recommendation.

How the SmallRig Super Clamp Fits a Compact Camera Rig

Start with the jaw range

The clamp's practical fit depends on the thickness of the support, not only whether it looks like a usable bar or edge.

Measure the spot where the jaws will sit and confirm it falls from 15 mm to about 40 mm; nearby shapes and surface contours can also affect how it seats.

Thread options simplify rig planning

Having both 1/4-inch and 3/8-inch threaded points gives the clamp more connection options when building around camera accessories.

Check the thread size and attachment orientation of each component before assembling the setup, since compatibility depends on the actual hardware being joined.

Keep the entire setup in view

The listed maximum weight recommendation is 3.3 pounds, which gives buyers a clear upper reference when selecting gear.

Consider the camera or accessory together with any attached components, and assess whether the support and clamp position suit the intended use rather than treating the number as a guarantee for every configuration.

Pads matter at the contact point

Rubber pads are intended to reduce slipping and scratching where the clamp meets its support.

This is a helpful design detail for finished surfaces, but a buyer should still choose a stable, appropriate mounting point and check the clamp's position before relying on the rig.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

Choose the reviewed clamp if you mainly want a compact clamp with threaded attachment points and plan to supply compatible mounting hardware separately.

The double ball head model is a better fit when you want an included articulated mounting connection and its listed capacity suits your setup.

  • The SmallRig Double Ball Head Super Clamp Mount combines a clamp with a double ball head and includes an action camera mount adapter.
  • Its description lists a 1.5 kg support capacity and mounting options for rods, tubes, tables, and frames.
  • The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes, a 15–40 mm jaw range, and a 3.3-pound maximum weight recommendation.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Pick the reviewed clamp for a simpler, compact mounting point when you already have compatible accessories.

The kit is more suitable when you need extra reach and angle adjustment in one package, provided its larger 15–54 mm jaw range and arm arrangement match your mounting plan.

  • The SmallRig 9.8-Inch Magic Arm Clamp Kit includes a super clamp and a 25 cm articulating arm with 1/4-inch screws at both ends.
  • The clamp opens from 15 to 54 mm, and the arm's double ball head design supports 360-degree adjustment.
  • The SmallRig Super Clamp is a standalone clamp whose jaw fits supports from 15 to about 40 mm; it does not include an articulating arm.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering when a compact clamp, a 15–40 mm jaw range, and 1/4-inch or 3/8-inch attachment points line up with your rig.

Its rubber pads and metal construction add practical appeal for repeat use across compatible supports.

Measure before buying and plan around the 3.3-pound maximum weight recommendation.

If you need an articulated arm included or a different jaw range, choose a mounting setup designed for that requirement; otherwise, this is a straightforward clamp to add to a camera or workshop kit.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for creators who need to attach cameras or accessories to compatible rods, shelves, and other solid supports.

  • The jaw opens to about 40 mm at maximum and closes to 15 mm minimum, defining the support thickness range to check before purchase.
  • Threaded attachment points include 1/4-inch holes and a 3/8-inch hole for compatible accessories.
  • The clamp is made from aluminum alloy and stainless steel.
  • Rubber pads on the clamp contact areas are designed to help limit slipping and scratching against the mounting surface.

Written by

lakelandraceway.com Editorial Team

Editorial team

Independent editorial coverage of motorsport & garage life.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for creators who need to attach cameras or accessories to compatible rods, shelves, and other solid supports.

  • The jaw opens to about 40 mm at maximum and closes to 15 mm minimum, defining the support thickness range to check before purchase.
  • Threaded attachment points include 1/4-inch holes and a 3/8-inch hole for compatible accessories.
Check Video Reviews on Amazon