Product Reviews

SmallRig 2905B Field Monitor Mount Holder Review

A compact monitor mount for camera operators who want adjustable viewing angles, cold shoe attachment and a secured fit for compatible 5- or 7-inch monitors.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact mount for camera operators who want to position a 5- or 7-inch monitor directly on a cage or handle.

Its tilt and swivel adjustments, cold shoe base and anti-twist details suit compact camera rigs, with load capacity varying by angle.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact monitor mount for camera operators who want adjustable viewing angles, cold shoe attachment and a secured fit for compatible 5- or 7-inch monitors.

  • Designed for 5- and 7-inch camera monitors, including Ninja V and V+ compatibility supported by built-in locating pins.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; the included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the bottom connects to a camera cage or handle, and a bottom 1/4-inch-20 threaded hole provides another mounting option.

Pros

  • Wide tilt and swivel movement makes it easier to set a monitor angle around the camera operator's working position.
  • Cold shoe and threaded mounting options support different compact rig configurations.

Consider before buying

  • The allowable load changes with tilt angle, so buyers need to check the correct limit for their chosen position.
  • Tilt tension can be adjusted by hand, but swivel tension requires the included Allen wrench.
Read the full review summary

The 2905B combines a cold shoe connection with a top 1/4-inch-20 screw, so it can place a monitor above a camera cage or handle while keeping the setup small.

It tilts through 180 degrees and swivels through 360 degrees, which gives operators room to adjust the viewing position as framing or shooting orientation changes.

This mount is most compelling for small-rig users with a compatible 5- or 7-inch monitor and a support point that accepts a cold shoe.

Locating pins and a silicone pad help resist twisting and surface scratches, while the angle-specific load limits make it important to check the monitor's weight and intended tilt before mounting.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

A 180-degree tilt range and 360-degree swivel provide broad positioning flexibility for a compact monitor mount.

8/10

Mounting flexibility

The cold shoe base and bottom 1/4-inch-20 threaded hole offer two connection approaches, while the top 1/4-inch-20 screw can hold a monitor or other accessory.

8/10

Anti-twist support

Locating pins and a silicone pad add contact points intended to help secure compatible monitors and protect their surfaces.

8/10

Tension adjustment

Tilt tension adjusts with a thumbscrew; swivel tension uses the included Allen wrench, so adjustment convenience differs by axis.

7/10

Load guidance

The product provides distinct maximum loads for several tilt angles, but buyers need to match the setup to the corresponding limit and secure the top screw.

9/10

Rig footprint

At 76 g with a folded size of 78 × 67 × 42 mm, it is a small, lightweight mounting component.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed for 5- and 7-inch camera monitors, including Ninja V and V+ compatibility supported by built-in locating pins.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; the included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the bottom connects to a camera cage or handle, and a bottom 1/4-inch-20 threaded hole provides another mounting option.
  • Top 1/4-inch-20 screw supports a monitor, microphone, light or other compatible accessory.
  • Silicone pad helps prevent scratching and twisting; the folded dimensions are 78 × 67 × 42 mm and listed weight is 76 g.
  • Load limits vary by tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees and under 5 lb at 30 degrees. The top knurled screw should be retightened with the Allen wrench for added security.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Wide tilt and swivel movement makes it easier to set a monitor angle around the camera operator's working position.
  • Cold shoe and threaded mounting options support different compact rig configurations.
  • Locating pins and a silicone pad address monitor twisting and surface contact.
  • Compact size and low weight suit rigs where keeping added bulk down matters.

Consider before buying

  • The allowable load changes with tilt angle, so buyers need to check the correct limit for their chosen position.
  • Tilt tension can be adjusted by hand, but swivel tension requires the included Allen wrench.
  • The top knurled screw requires additional tightening with the wrench for added security, adding a setup step.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider the 2905B if your camera cage or handle has a cold shoe and you want a small mount for a compatible 5- or 7-inch monitor.

The 180-degree tilt and 360-degree swivel allow substantial repositioning without choosing a longer articulating arm, while the silicone contact pad and locating pins add useful interface details for a monitor setup.

Before choosing it, compare your monitor's weight and the angle you expect to use with the stated load limits.

Also confirm that your support point accepts the cold shoe, or plan around the bottom 1/4-inch-20 threaded hole, and keep the included Allen wrench available for swivel adjustment and screw retightening.

Who should skip it

Choose another mounting approach if your setup needs a clamp that attaches to a rod, tube or desk edge rather than a cold shoe or threaded support point.

Look elsewhere if you need to position a monitor far from the camera; this compact holder is intended to mount directly to a cage or handle, not extend on a long arm.

How the SmallRig Monitor Mount fits a compact camera rig

Positioning range for on-camera monitoring

The 180-degree tilt and 360-degree swivel give this mount room to reposition a screen without adding a long support arm.

That can be useful when changing the viewing angle around a camera cage or handle, though the stated load limit must be matched to the selected tilt.

A mounting interface with two routes

The cold shoe base is the direct path for a cage or handle with a compatible shoe, while the 1/4-inch-20 hole on the bottom offers a threaded connection for an arm or stabilizer.

The top screw can hold a monitor, microphone or light, making it worth checking both the rig's available attachment point and the accessory's thread compatibility before buying.

Anti-twist details and setup care

Locating pins are designed to further secure compatible Ninja V and V+ monitors, and the silicone pad helps avoid surface scratching and twisting.

For a secure setup, retighten the top knurled screw with the included Allen wrench and keep the angle-specific load figures in view when repositioning the screen.

A small holder with defined limits

At 76 g and 78 × 67 × 42 mm folded, the mount adds little bulk to a compact kit.

Its specific angle-dependent load guidance is a useful constraint for choosing placement; it is not a reason to assume the highest listed maximum applies at every angle.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig 6313 Camera Monitor Mount

Compare the 6313 if portrait-orientation mounting or its retractable locating screw matters to your setup. The 2905B remains a suitable choice when its specified 5- and 7-inch monitor compatibility and angle-specific load guidance match your rig.

  • The 6313 also provides 180-degree tilt and 360-degree pan, with thumb-adjustable tilt damping and a cold shoe base.
  • It adds a retractable 1/4-inch-20 locating screw and supports horizontal and vertical monitor installation.
  • The 2905B offers tilt and swivel adjustment, a cold shoe base, a bottom 1/4-inch-20 hole and locating pins for compatible Ninja V and V+ monitors.
  • Its load limits vary with tilt angle.

Camera Mounts & Clamps alternative

SmallRig 1498 Articulating Rosette Arm
4.6/5

900+ ratings

Read Amazon Reviews

SmallRig 1498 Articulating Rosette Arm

Choose the 1498 if you need the monitor positioned farther from the camera and want a longer articulated support. The 2905B is the more direct fit when you want a compact holder attached at the cage or handle.

  • The 1498 is an 11-inch articulating arm with a cold shoe at one end and a 1/4-inch thread at the other.
  • Its description lists a maximum load capacity of 2.8 kg and a best weight load of 1.5–2 kg.
  • The 2905B mounts compactly at a cold shoe or bottom threaded connection and provides 180-degree tilt with 360-degree swivel.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact rig that needs a 5- or 7-inch monitor positioned directly above a cage or handle.

Its broad tilt and swivel movement, two base connection options and anti-twist contact details give it a useful set of features for on-camera monitoring.

Check your mounting interface, monitor weight and working angle before buying: load capacity varies with tilt, and swivel tension needs an Allen wrench. If those constraints fit your setup, this holder offers a compact, adjustable mounting solution.

Your review at a glance

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact monitor mount for camera operators who want adjustable viewing angles, cold shoe attachment and a secured fit for compatible 5- or 7-inch monitors.

  • Designed for 5- and 7-inch camera monitors, including Ninja V and V+ compatibility supported by built-in locating pins.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
  • Tilt tension adjusts with a thumbscrew; the included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the bottom connects to a camera cage or handle, and a bottom 1/4-inch-20 threaded hole provides another mounting option.

Written by

lakelandraceway.com Editorial Team

Editorial team

Independent editorial coverage of motorsport & garage life.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount Holder

SmallRig 2905B Field Monitor Mount Holder

A compact monitor mount for camera operators who want adjustable viewing angles, cold shoe attachment and a secured fit for compatible 5- or 7-inch monitors.

  • Designed for 5- and 7-inch camera monitors, including Ninja V and V+ compatibility supported by built-in locating pins.
  • Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
Check Video Reviews on Amazon