Product Reviews

SmallRig Ballhead Clamp Double Ball Adapter Review

A compact mounting option for creators who need to clamp a small camera accessory to a compatible rod, tube, or support.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Ballhead Clamp Double Ball Adapter review is for camera users who want a compact way to mount a monitor, light, or other small accessory to a compatible support.

Its combination of a clamp, ball head, and 1/4-inch screw is useful when you need flexible positioning without a longer arm.

SmallRig Ballhead Clamp Review Summary

The quick verdict

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF

A compact mounting option for creators who need to clamp a small camera accessory to a compatible rod, tube, or support.

  • Bottom clamp jaws open up to 40 mm for compatible rods, tubes, and other supports.
  • A 1/4-inch screw provides a mounting point for a monitor, video light, or other compatible accessory.
  • The ball head offers 360-degree articulation for adjusting accessory orientation.
  • A single locking knob is used to secure the ball head position.

Pros

  • Combines a support clamp and adjustable ball-head mounting point in one compact unit.
  • The 40 mm jaw opening fits a range of compatible rods and tubes.

Consider before buying

  • The 40 mm opening means buyers need to check the support diameter before choosing a mounting position.
  • The stated maximum load is up to 1 kg, so it is aimed at lighter accessories rather than heavy rig components.
Read the full review summary

This adapter combines a bottom clamp that opens to 40 mm with a 1/4-inch screw and a ball-head joint.

The clamp can attach to a compatible rod, tube, or other support while the screw end carries a small camera accessory, giving a rig a direct mounting point with adjustable orientation.

Its stated maximum load is up to 1 kg, and its compact folded size and 163 g weight suit lightweight rigs where space matters.

It is most relevant to camera operators who already know the diameter of their mounting point and want an integrated clamp-and-head unit rather than a separate clamp and arm.

The buying factors

SmallRig Ballhead Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp and 1/4-inch screw support several small accessory types, while the ball head enables angle adjustment.

7/10

Clamp range

A jaw opening up to 40 mm covers many rods and tubes, though buyers should check their support's diameter.

6/10

Load guidance

The stated maximum load is up to 1 kg, making this a better match for lightweight accessories than heavier equipment.

8/10

Rig footprint

At 163 g with a folded size of 68.5 × 43 × 10 mm, it is a compact addition to a camera kit.

7/10

Surface protection

A dense rubber pad at the clamp area is intended to protect the contact surface from scratches.

7/10

Positioning control

The ball head provides 360-degree articulation and uses one locking knob for adjustment and tightening.

Key Features and Specifications of SmallRig Ballhead Clamp

  • Bottom clamp jaws open up to 40 mm for compatible rods, tubes, and other supports.
  • A 1/4-inch screw provides a mounting point for a monitor, video light, or other compatible accessory.
  • The ball head offers 360-degree articulation for adjusting accessory orientation.
  • A single locking knob is used to secure the ball head position.
  • The body is made almost entirely from aluminum alloy, with a dense rubber pad on the clamp area.
  • The listed folded size is 68.5 × 43 × 10 mm, and the listed weight is 163 g.

Pros and Cons of SmallRig Ballhead Clamp

Pros

  • Combines a support clamp and adjustable ball-head mounting point in one compact unit.
  • The 40 mm jaw opening fits a range of compatible rods and tubes.
  • A 1/4-inch screw supports common small camera accessories.
  • The rubber pad helps protect the clamped surface from scratches.

Consider before buying

  • The 40 mm opening means buyers need to check the support diameter before choosing a mounting position.
  • The stated maximum load is up to 1 kg, so it is aimed at lighter accessories rather than heavy rig components.
  • The short, compact design does not provide the reach of a longer articulating arm.

Who Should Buy SmallRig Ballhead Clamp?

Good fit

Consider this adapter if you need to attach a small monitor, light, or similar accessory to a rod or tube that measures no more than 40 mm across.

The integrated clamp and ball head can simplify a compact camera rig, and the 1/4-inch screw gives the accessory a familiar connection point.

It also makes sense when positioning matters more than reach. The ball head allows 360-degree adjustment, and the single locking knob keeps the arrangement straightforward when you are setting up a lightweight accessory.

Before buying, check both the support diameter and the accessory's mounting interface, then keep the combined setup within the stated maximum load of up to 1 kg.

That makes it easier to judge whether this compact adapter matches your rig.

Who should skip it

Skip it if your accessory and mounting hardware together exceed the stated load limit, or if the support you want to use is wider than the clamp's 40 mm opening.

If your setup needs a longer extension arm to position an accessory away from the clamp point, this compact adapter may not provide the reach you need.

How the SmallRig Ballhead Clamp Fits a Camera Rig

A clamp and ball head in one unit

The adapter's main appeal is its combination of two mounting tasks: gripping a support and offering a 1/4-inch screw for an accessory.

That can reduce the number of separate pieces needed when you want to place a small monitor or light on a compatible rod or tube.

Check the mounting point first

The clamp jaws open to 40 mm, so measuring the support before setup is a practical first step.

The rubber contact pad is intended to reduce scratching at the clamp area, but the fit still depends on the shape and size of the surface you choose.

Keep the load appropriate

The listed maximum load is up to 1 kg.

That gives buyers a useful boundary for choosing accessories, but it does not turn the adapter into a heavy-duty support; a lightweight monitor or light is a more natural fit than a substantial rig component.

Compact placement, limited reach

Its folded dimensions and 163 g weight are helpful where a rig needs to stay small.

In exchange, the design is best for mounting close to the support; buyers who need a longer offset should consider how far the accessory must sit from its attachment point.

Alternatives to SmallRig Ballhead Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount 1138
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount 1138

Choose the reviewed adapter when its compact clamp-and-screw arrangement and 40 mm jaw opening fit your rig. Consider the 1138 if the included action-camera adapter or its higher stated load limit better matches your accessory setup.

  • This super clamp mount includes a double ball head, a 1/4-inch-20 screw, and a GoPro adapter; its stated maximum load is up to 1.5 kg.
  • The reviewed adapter combines a bottom clamp with a 1/4-inch screw and has a stated maximum load of up to 1 kg.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit 2732
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit 2732

Choose the reviewed adapter for a compact mounting point with less arm length to manage.

The 2732 is a better fit if you need to extend an accessory away from the clamp or want the kit's additional threaded connections.

  • This kit pairs a clamp with a 9.8-inch articulating arm, with 1/4-inch and 3/8-inch threads on the clamp and 1/4-inch screws at both ends of the arm.
  • The reviewed adapter is a compact clamp with an integrated ball head and 1/4-inch screw, suited to mounting close to its support.

Is SmallRig Ballhead Clamp Worth It?

The SmallRig Ballhead Clamp Double Ball Adapter 2164-CF is worth considering for a lightweight camera rig that needs a compact clamp, adjustable ball head, and 1/4-inch accessory screw in one piece.

Its 40 mm jaw opening and stated maximum load of up to 1 kg give buyers concrete limits to check against their setup.

Choose it when the accessory can sit near the support and its weight and mounting dimensions fit. If you need more reach or a higher load limit, select a mount designed around those requirements.

Your review at a glance

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF

A compact mounting option for creators who need to clamp a small camera accessory to a compatible rod, tube, or support.

  • Bottom clamp jaws open up to 40 mm for compatible rods, tubes, and other supports.
  • A 1/4-inch screw provides a mounting point for a monitor, video light, or other compatible accessory.
  • The ball head offers 360-degree articulation for adjusting accessory orientation.
  • A single locking knob is used to secure the ball head position.

Written by

lakelandraceway.com Editorial Team

Editorial team

Independent editorial coverage of motorsport & garage life.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF

SmallRig Ballhead Clamp Double Ball Adapter 2164-CF

A compact mounting option for creators who need to clamp a small camera accessory to a compatible rod, tube, or support.

  • Bottom clamp jaws open up to 40 mm for compatible rods, tubes, and other supports.
  • A 1/4-inch screw provides a mounting point for a monitor, video light, or other compatible accessory.
Check Video Reviews on Amazon