The SmallRig Aluminum Alloy Camera Cage Rig review is for Sony A6400-series owners weighing extra accessory mounts against the added bulk of a cage.
This model is designed for the A6400 and A6100, and also fits the A6300 and A6500.
SmallRig Camera Cage Review Summary
The quick verdict

800+ ratings
Read Amazon ReviewsSmallRig Camera Cage Rig for Sony A6400 Series
A practical fit for Sony A6400-series vloggers and video creators who want a protected camera body and more mounting points for accessories.
- Designed for Sony A6400 and A6100 cameras; also compatible with the A6300 and A6500.
- Uses a bottom 1/4-inch screw and side M2.5 screw to secure the camera and help prevent twisting.
- Rubber pads on the bottom help protect the camera body from scratches.
- Offers 1/4-inch and 3/8-inch threaded holes and 3/8-inch ARRI locating holes for accessory mounting.
Pros
- Camera-specific compatibility covers four Sony models in the A6000 series.
- The mounting points support a range of compatible rig accessories.
Consider before buying
- Its fit is limited to the listed Sony camera models, so owners of other bodies should look for a cage designed for their camera.
- The HDMI cable clamp is optional, which means buyers who want that accessory should plan for a separate purchase.
Read the full review summary
The cage combines a camera-specific fit with multiple threaded mounting points, access to key controls and slots, and a built-in flat screwdriver for tightening its screws.
A bottom screw and side screw secure the camera, while rubber pads help keep the cage from rubbing directly against the body.
It suits vloggers and video creators who want to build out a compact camera rig with compatible accessories or attach the setup to a tripod.
Before buying, check that your camera is one of the supported models and map your planned accessories to the cage’s mounting points; the optional HDMI cable clamp is separate.
The buying factors
SmallRig Camera Cage Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Camera fit
Designed for the A6400 and A6100, with compatibility also listed for the A6300 and A6500.
Mounting flexibility
Includes 1/4-inch and 3/8-inch threaded holes plus 3/8-inch ARRI locating holes for accessories.
Camera access
The design is intended to leave buttons, the battery, and SD card slot accessible.
Camera retention
A bottom 1/4-inch screw and a side M2.5 screw are designed to help prevent twisting.
Setup convenience
The flat screwdriver stored on the bottom gives users a tool for tightening or loosening the cage screws.
Port protection options
An optional HDMI cable clamp is available, so users who need cable support should account for that extra piece.
Key Features and Specifications of SmallRig Camera Cage
- Designed for Sony A6400 and A6100 cameras; also compatible with the A6300 and A6500.
- Uses a bottom 1/4-inch screw and side M2.5 screw to secure the camera and help prevent twisting.
- Rubber pads on the bottom help protect the camera body from scratches.
- Offers 1/4-inch and 3/8-inch threaded holes and 3/8-inch ARRI locating holes for accessory mounting.
- Threaded holes on the bottom allow the cage to be attached to a tripod.
- A flat screwdriver is stored on the bottom of the cage for tightening and loosening screws.
- An optional HDMI cable clamp is available separately.
Pros and Cons of SmallRig Camera Cage
Pros
- Camera-specific compatibility covers four Sony models in the A6000 series.
- The mounting points support a range of compatible rig accessories.
- The design is intended to preserve access to the camera’s buttons, battery, and SD card slot.
- A built-in screwdriver keeps a basic adjustment tool with the cage.
Consider before buying
- Its fit is limited to the listed Sony camera models, so owners of other bodies should look for a cage designed for their camera.
- The HDMI cable clamp is optional, which means buyers who want that accessory should plan for a separate purchase.
- A cage adds hardware around the camera; consider the assembled setup’s size and handling if you prioritize a bare, lightweight body.
Who Should Buy SmallRig Camera Cage?
Good fit
Consider this cage if you use a Sony A6400, A6100, A6300, or A6500 and want more places to attach compatible accessories.
Its threaded points and ARRI locating holes give creators room to arrange a rig around their shooting needs, while bottom mounting points also allow tripod attachment.
The two-screw camera hold and bottom rubber pads address useful everyday concerns: keeping the camera seated in the cage and reducing direct contact with the body.
Check the fit against your exact camera model and any accessories you plan to install before assembling a full setup.
For video work involving an HDMI cable, decide whether the optional cable clamp belongs in your rig and budget for it separately. The stored screwdriver is a small convenience for initial setup or adjustments.
Who should skip it
Skip this model if your camera is outside the A6400, A6100, A6300, and A6500 family; the camera-specific fit makes compatibility the first requirement.
It may also be a poor fit if you prefer using the camera without a cage or do not need additional mounting points. For a cable-managed setup, first confirm that the separate HDMI clamp meets your needs.
How the SmallRig Camera Cage Fits an A6400-Series Rig
Mounting points and rig planning
The combination of 1/4-inch and 3/8-inch threads with 3/8-inch ARRI locating holes gives this cage several ways to accept compatible accessories.
Before choosing it, list the handles, mounts, or other components you intend to use and confirm that their attachment points match; the cage’s flexibility is most useful when it corresponds to an actual rig plan.
Camera access and retention
SmallRig describes the cage as leaving the camera buttons, battery, and SD card slot accessible, an important consideration when adding a frame around a small camera body.
The bottom and side screws are designed to secure the camera and reduce twisting, while the bottom rubber pads help protect the body.
Check these access points with your own setup after fitting the cage, especially if you use additional attachments near controls or doors.
Tripod and cable considerations
Threaded holes on the cage’s bottom provide a way to attach the assembled camera to a tripod.
HDMI cable support is a separate decision: the optional clamp is available for cable protection, so include it if your workflow depends on a secured HDMI connection.
Buyers can evaluate the cage and any add-on clamp as parts of the complete rig they plan to carry.
On-camera setup convenience
The flat screwdriver stored on the cage’s underside helps keep a basic tool close at hand when tightening or loosening its screws.
That makes setup adjustments more convenient, though buyers should still check that the cage is secure and that the camera’s controls and doors remain usable after assembly.
Alternatives to SmallRig Camera Cage
Only one supplied alternative offers a camera-specific cage for a related Sony body; the other options focus on separate mounts, clamps, or arms rather than a comparable camera cage.
Battery-focused alternative

800+ ratings
Read Amazon ReviewsSmallRig Cage Kit for Sony A6700
Choose the reviewed cage if your camera is one of its four supported A6000-series models. Consider the A6700 kit if you own that newer camera and want the included cable clamp and integrated Arca-Swiss plate.
- This cage kit is designed for the Sony A6700 and includes an HDMI cable clamp.
- Its description also lists 1/4-inch and 3/8-inch mounting holes, an integrated Arca-Swiss plate, and a hinge arm on the battery door.
- The SmallRig Camera Cage is designed for the A6400, A6100, A6300, and A6500, and offers multiple threaded mounting points with an optional HDMI cable clamp.
Is SmallRig Camera Cage Worth It?
The SmallRig Camera Cage Rig is worth considering for owners of the A6400, A6100, A6300, or A6500 who want a secure camera frame and flexible accessory mounting.
Its camera access provisions, tripod attachment points, rubber pads, and stored screwdriver make it a practical foundation for a customized rig.
Confirm your exact camera model and accessory fit before buying, and account separately for the optional HDMI cable clamp if you need one.
If you do not need cage mounting points or want to keep your setup bare, the added frame may not offer enough benefit.
Your review at a glance

800+ ratings
Read Amazon ReviewsSmallRig Camera Cage Rig for Sony A6400 Series
A practical fit for Sony A6400-series vloggers and video creators who want a protected camera body and more mounting points for accessories.
- Designed for Sony A6400 and A6100 cameras; also compatible with the A6300 and A6500.
- Uses a bottom 1/4-inch screw and side M2.5 screw to secure the camera and help prevent twisting.
- Rubber pads on the bottom help protect the camera body from scratches.
- Offers 1/4-inch and 3/8-inch threaded holes and 3/8-inch ARRI locating holes for accessory mounting.