Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short, High-Bandwidth Link for Gaming Monitors

A 1.6-foot cable for gamers connecting DisplayPort-equipped PCs and monitors who want DP 2.1 bandwidth without excess cable slack.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review comes down to a specific use case: a short, VESA-certified DP 2.1 connection for a compatible gaming PC and monitor.

Its 80Gbps rating and broad high-refresh resolution support stand out, while the 1.6-foot length makes placement the first thing to check.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A 1.6-foot cable for gamers connecting DisplayPort-equipped PCs and monitors who want DP 2.1 bandwidth without excess cable slack.

  • VESA-certified DisplayPort 2.1 cable rated for up to 80Gbps.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, HDCP 2.3, and 3D.
  • Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.

Pros

  • High 80Gbps bandwidth rating with a range of demanding resolution and refresh-rate modes.
  • Short length can reduce loose cable around a close desktop setup.

Consider before buying

  • The 1.6-foot reach limits routing options and may not reach between devices placed farther apart.
  • It is a DisplayPort-to-DisplayPort cable, so check that both the computer and monitor have the required ports.
Read the full review summary

This cable is designed for a direct DisplayPort-to-DisplayPort connection, with a claimed bandwidth of 80Gbps and support for uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.

With Display Stream Compression enabled, the listed ceilings rise as high as 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.

Those modes depend on the capabilities of the computer, monitor, and connection settings; the cable alone cannot create them.

Its short reach can suit a close desktop setup where a longer lead would leave a coil behind the display. The latch-free plugs, braided nylon exterior, and 24-month service period add practical appeal.

Before buying, confirm that both devices have DisplayPort sockets and that 1.6 feet reaches comfortably along the intended route.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

The 80Gbps DP 2.1 rating gives this cable substantial headroom for compatible high-resolution, high-refresh setups.

9/10

High-refresh support

The listed uncompressed modes include 4K at 240Hz and 2K at 540Hz, with higher ceilings available using DSC.

8/10

Compatibility range

It is backward compatible with DP 2.0 and 1.4 and is intended for DP-equipped graphics cards and monitors.

8/10

Short-run convenience

At 1.6 feet, it can keep a close PC-to-monitor connection tidy, but offers little routing flexibility.

8/10

Build and handling

Triple shielding, tinned copper conductors, gold-plated connectors, and a nylon exterior are useful design features; there is no latch to release.

5/10

Setup flexibility

The fixed short length is a meaningful constraint, and both display endpoints need DisplayPort for the intended direct connection.

Key Features and Specifications of Silkland DP80 Cable

  • VESA-certified DisplayPort 2.1 cable rated for up to 80Gbps.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, HDCP 2.3, and 3D.
  • Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, no latch, 24K gold-plated contacts, 28AWG tinned copper conductors, and triple shielding.
  • Grey nylon exterior; 1.6-foot length for indoor use. Silkland lists 24-month service and technical support within 18 hours.

Pros and Cons of Silkland DP80 Cable

Pros

  • High 80Gbps bandwidth rating with a range of demanding resolution and refresh-rate modes.
  • Short length can reduce loose cable around a close desktop setup.
  • Backward compatibility with DP 2.0 and 1.4 offers flexibility with older DisplayPort equipment.
  • Latch-free connectors and a braided exterior address everyday plugging and handling considerations.

Consider before buying

  • The 1.6-foot reach limits routing options and may not reach between devices placed farther apart.
  • It is a DisplayPort-to-DisplayPort cable, so check that both the computer and monitor have the required ports.
  • The highest listed display modes depend on compatible hardware and DSC support; the cable rating alone does not guarantee a particular resolution or refresh rate.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the DP80 if your PC and monitor sit close together, both have DisplayPort, and you want a high-bandwidth cable for a demanding gaming display.

The broad mode list gives it room to serve setups ranging from high-refresh 2K to 4K and 8K configurations, provided the connected hardware supports the chosen mode.

Measure the actual route before ordering, including any slack needed for the monitor to move or swivel. A short cable works best when the PC is beside or directly below the display and the connection path is straightforward.

The cable's backward compatibility may also make it useful when connecting newer and older DisplayPort equipment.

Check the output capabilities of the graphics card and the input specifications of the monitor, especially if you plan to use UHBR20, DSC, VRR, or a high refresh rate.

Who should skip it

Skip this length if the computer is across a desk, mounted away from the monitor, or needs room for a movable arm. Measure the cable path and allow practical slack before choosing a 1.6-foot lead.

Look for another connection type if either endpoint lacks a DisplayPort socket. Also avoid assuming that the cable by itself enables the most demanding resolutions or refresh rates; verify that both connected devices support the mode you need.

How the Silkland DP80 Cable fits a gaming setup

Bandwidth matters only when the whole display chain supports it

The 80Gbps rating and UHBR20 support position this cable for newer high-bandwidth DisplayPort setups. Actual resolution and refresh rate depend on the graphics card, monitor, and settings.

The listed uncompressed modes include 4K at 240Hz and 8K at 60Hz, while modes such as 16K at 60Hz or 4K at 540Hz are specified with DSC enabled.

Check both ends' supported modes before treating a headline maximum as a practical target.

A short cable rewards careful placement

At 1.6 feet, the DP80 is aimed at a compact connection rather than flexible room routing. That can help avoid excess cable behind a closely placed monitor, but the same short reach makes measurement essential.

Include the path around the desk or monitor stand, and consider whether you reposition the screen during normal use.

Connector design and compatibility

The male-to-male DisplayPort plugs have no latch, so they can be unplugged without operating a release mechanism. The gold-plated connectors, tinned copper conductors, and triple shielding are build choices intended for signal quality and interference management.

The cable is backward compatible with DP 2.0 and 1.4, but its advanced modes still require compatible devices.

Gaming and multi-monitor features

VRR, FEC, ALLM, DSC 1.2a, and MST are among the supported technologies. These features can be relevant in gaming or multi-display arrangements when the connected equipment also supports them.

For a multi-monitor desk, confirm the graphics card's outputs and monitor inputs, then plan consistent cable types across the displays as the product guidance recommends.

Alternatives to Silkland DP80 Cable

One useful alternative is included because it offers a substantially longer cable for a similar DisplayPort gaming connection.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort Cable, 10 ft

Choose the DP80 when the short run fits and its higher bandwidth rating suits the target setup. Consider the 10-foot model when you need more reach and its listed display modes match your equipment.

  • This 10-foot Silkland DP 2.1 cable is rated for 54Gbps and lists support up to 16K at 60Hz with DSC, 8K at 120Hz, 4K at 240Hz, and 2K at 360Hz.
  • The DP80 is a 1.6-foot, 80Gbps cable with listed uncompressed support up to 4K at 240Hz and 2K at 540Hz.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a compact PC-to-monitor setup that needs a short DisplayPort lead with 80Gbps bandwidth and support for demanding display modes.

Its build features and backward compatibility add flexibility across compatible DP equipment.

Measure first and verify the graphics card and monitor support the resolution, refresh rate, and DSC mode you plan to use.

If the 1.6-foot reach fits your desk, the DP80 is a focused option; if not, choose a longer cable suited to the route.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A 1.6-foot cable for gamers connecting DisplayPort-equipped PCs and monitors who want DP 2.1 bandwidth without excess cable slack.

  • VESA-certified DisplayPort 2.1 cable rated for up to 80Gbps.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, HDCP 2.3, and 3D.
  • Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.

Written by

lakelandraceway.com Editorial Team

Editorial team

Independent editorial coverage of motorsport & garage life.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A 1.6-foot cable for gamers connecting DisplayPort-equipped PCs and monitors who want DP 2.1 bandwidth without excess cable slack.

  • VESA-certified DisplayPort 2.1 cable rated for up to 80Gbps.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
Check Video Reviews on Amazon